Features:
Built in many LED beads, brighter than original incandescent bulbs.
LED tube strip with stretchable design, soft and convenient to make any shapes with proper curvature.
Low power consumption, energy saving, long life span.
Strong adhisive, easily install.
Water proof and aseismatic, can be used for all cars with 12V power supply.
Flashing with dual colors, an ideal decoration for your car.
Specification:
Material: silicone, LED
Strip Bar Color: shown as picture
LED Color: red + ice blue
LED Tube Strip Length: approx.120cm
Luminescence Mode: positive
Power: 7.2W
Voltage: 12V
Package Weight: approx.190g
Flashing Mode:
Driving: keep ice blue light
Braking: keep red light
Turn Signal: red streamer
Duable Flash: red streamer
Wiring Instruction And Functions:
1. Red wire: connect to your car power supply positive.
2. Black wire: connect to your car power supply negative or ground.
3. Green wire: connect to rear tail light wire positive, keep ice blue light when the headlight turned up.
4. White Wire: connect to brake wire positive, keep red light when braking.
5. Yellow wire (L): connect turn left wire positive, turn left - red light flow from right to left.
6. Yellow wire (R): connect turn right wire positive, turn right - red light flow from left to right.
7. Duable flash on: red light flow from the middle to both sides.
Package List:
1 * Rear Tail Box Dynamic Streamer
Installation:
Wipe out where it needs to be installed, tear the glue off the back and paste it directly, then connect the corresponding wires to test its function is normal. Please do not wash your car within 24 hours after installation.
Accessories 
